UFi emmc helth show new update Device lifetime: Not Defined

X

XPERTGSM

Guest
Dear ufixers new setup is great update but there some bugs like
every emmc helth Showing there Device lifetime Not Defined
please solve them

emmc helth report
Serial number: 0011-8842-8108
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HBG4a2 (0x484247346132), rev: 0xA4, serial number: 0x33B5182B
Manufacturing date: Sep 2016
CID: 90014A48 42473461 32A433B5 182B9372
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
Device version: 0x4205
Firmware version: 0xA4
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 29.12 GiB(31,268,536,320 bytes)

eMMC 5.x Health report:
Device lifetime: Not Defined
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 30% - 40% device life time used
SK Hynix Health (Smart) report:
Factory bad blocks count in CE0: 0
Run-time bad blocks count in CE0: 0
Factory bad blocks count in CE1: 0
Run-time bad blocks count in CE1: 0
Factory bad blocks count in CE2: 0
Run-time bad blocks count in CE2: 0
Factory bad blocks count in CE3: 0
Run-time bad blocks count in CE3: 0