UMT Nokia 2 TA-1011 Storage Space Running Out Problem Solve by Umt QcFire.

[aftab_ansari5287]

Nokia 2 TA-1011 Storage Space Running Out Problem Solve by Umt Mtk.​

---

​

Logs :

Brand    : Nokia
Operation    : Flash Firmware (nb0)
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM83)
Driver Info    : Meig Incorporated., qcusbser.sys, 3.1.2.9
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1009600 [8909] 00000000
OPK_DATA    : A57FDEEB0D02233786D8DDCA8A9889D62F92D43EE56EAC9966024663C39A5B06
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8909, EMMC, 8 GB
LU Count    : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [E1M-0-0680-emmc_appsboot.mbn] -> [aboot]...Done
Writing [E1M-0-0680-emmc_appsboot.mbn] -> [abootbak]...Done
Writing [E1M-0-0680-rpm.mbn] -> [rpm]...Done
Writing [E1M-0-0680-rpm.mbn] -> [rpmbak]...Done
Writing [E1M-0-0680-tz.mbn] -> [tz]...Done
Writing [E1M-0-0680-tz.mbn] -> [tzbak]...Done
Writing [E1M-00WW-001-sutinfo.img] -> [sutinfo]...Done
Writing [fver] -> [systeminfo]...Done
Writing [E1M-00WW-026-splash.img] -> [splash]...Done
Writing [E1M-0-0010-0001-userdata-ftm.img.ext4] -> [ftmlog]...Done
Writing [E1M-0-0680-ftm.img] -> [ftm]...Done
Writing [E1M-0-0030-0001-hidden.img.ext4] -> [hidden]...Done
Writing [E1M-00WW-026-cda.img] -> [cda]...Done
Writing [E1M-0-0680-00WW-recovery.img] -> [recovery]...Done
Writing [E1M-0-0680-00WW-boot.img] -> [boot]...Done
Writing [E1M-0-0680-NON-HLOS.bin] -> [modem]...Done
Writing [E1M-0-0680-00WW-system.img] -> [system]...Done
Writing [E1M-0-0680-0001-persist.img] -> [persist]...Done
Writing [E1M-0-0680-cmnlib.mbn] -> [cmnlib]...Done
Writing [E1M-0-0680-cmnlib.mbn] -> [cmnlibbak]...Done
Writing [E1M-0-0680-keymaster.mbn] -> [keymaster]...Done
Writing [E1M-0-0680-keymaster.mbn] -> [keymasterbak]...Done
Writing [E1M-0-0680-00WW-userdata.img] -> [userdata]...Done
Writing [E1M-0-0680-gpt_main0.bin] -> [PrimaryGPT]...Done
Applying Patches..............Done
Formatting userdata...Done
Resetting FRP...Done
Setting Bootable Stroage Drive to 0...Done
Operation Finished.
QcFire Ver. 6.7