GuDron

Super Moderator
Staff member
Super Moderator
Jan 28, 2020
666
7
134
Language
English

SAMSUNG A10s A107F Read Flash | Write Flash | Read NVRAM With CM2​


1635785879840.png

Read Flash:​

Code:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : B151739DA8E555753C2964052861A5A4
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 1E3A5F838CBB518EEC3E815AFD34440F2252E068F9EC3F10A87D3AEAA81D4151
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_s96116ra1.bin
     EMI : CNT : 0008
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 150100514436334D42034322907C2749
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42
        EMMC: VEN : SAMSUNG : QD63MB
        EMMC: SNN : 1126338684 ( 0x4322907C) , MF : 2/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : CD587B53657122DCCAEBF165A648B3B2

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : samsung
Product Device : a10s
Product Model  : SM-A107F
Product Name   : a10sxx
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012.A107FXXU8CUH1
Build Time     : 05.08.2021
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-07-01
Product Info   : a10s
Product Board  : S96116RA1
Board Platform : mt6765
Product Manfct : samsung

MT6765__samsung__SM-A107F__11__RP1A.200720.012.A107FXXU8CUH1__RP1A.200720.012__a10s

Read : preloader.bin
Read : efuse.img
Read : nvram.bin
Read : efs.img
ExtSparse : Compression ratio : 91%
Read : sec_efs.img
ExtSparse : Compression ratio : 11%
Read : param.img
Read : up_param.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : persistent.img
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : lk.bin
Read : steady.img
Read : boot.img
Read : recovery.img
Read : dtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 31%
Read : product.img
ExtSparse : Compression ratio : 73%
Read : system.img
ExtSparse : Compression ratio : 9%
Read : vbmeta.img
Read : cache.img
Read : omr.img
Read : userdata.img

FW Size  : 3.80 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : C:\Users\marha\Desktop\A10s\MT6765__samsung__SM-A107F__11__RP1A.200720.012.A107FXXU8CUH1__RP1A.200720.012__a10s\

Done!

Write Flash:​

Code:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : B151739DA8E555753C2964052861A5A4
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 1E3A5F838CBB518EEC3E815AFD34440F2252E068F9EC3F10A87D3AEAA81D4151
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_s96116ra1.bin
     EMI : CNT : 0008
 EMI : [00] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2.00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 700100464D42434541 : VEN : KINGSTON  | DEV : FMBCEA : RAM : [ 2.00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100515836334D42 : VEN : SAMSUNG   | DEV : QX63MB : RAM : [ 2.00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100515836334142 : VEN : SAMSUNG   | DEV : QX63AB : RAM : [ 2.00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 150100475836424142 : VEN : SAMSUNG   | DEV : GX6BAB : RAM : [ 3.00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 150100475836424D42 : VEN : SAMSUNG   | DEV : GX6BMB : RAM : [ 3.00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 2.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 150100514436334D42034322907C2749
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42
        EMMC: VEN : SAMSUNG : QD63MB
        EMMC: SNN : 1126338684 ( 0x4322907C) , MF : 2/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : CD587B53657122DCCAEBF165A648B3B2

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000000600000
Erase : 0x0000000006B00000 : 0x0000000001D00000
Erase : 0x000000000A800000 : 0x0000000006000000
Erase : 0x0000000011800000 : 0x0000000000800000
Erase : 0x0000000015080000 : 0x0000000000980000
Erase : 0x0000000015D00000 : 0x0000000006900000
Erase : 0x000000001CA00000 : 0x00000001F3600000

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : EFUSE
Write : PARAM
Write : UP_PARAM
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SSPM_1
Write : LK
Write : BOOT
Write : RECOVERY
Write : DTBO
Write : TEE1
Write : VENDOR
Write : PRODUCT
Write : SYSTEM
Write : VBMETA
Write : CACHE
Write : OMR
Write : USERDATA

Ultra : OK! [ All failed parts successfully flashed ]

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!

Read NVRAM:​

Code:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : B151739DA8E555753C2964052861A5A4
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 1E3A5F838CBB518EEC3E815AFD34440F2252E068F9EC3F10A87D3AEAA81D4151
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_s96116ra1.bin
     EMI : CNT : 0008
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 150100514436334D42034322907C2749
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42
        EMMC: VEN : SAMSUNG : QD63MB
        EMMC: SNN : 1126338684 ( 0x4322907C) , MF : 2/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : CD587B53657122DCCAEBF165A648B3B2

DA : USB : HIGH-SPEED

Boot done!

NVRAM : TITAN_S1_Q0MP1_K62V1_64_BSP_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_TC10_PR1_SP_V4_P36
NVRAM : 0xBC0AD96C
NVRAM : State : Ok!
NVRAM : SecLv : Vendor Signed
INFO  : WiFi MAC : 942DDC60A26E
INFO  : BlTh MAC : 942DDC60A26F
INFO  : IMEI[1] : 84CDF4580BA4C35
INFO  : IMEI[2] : 0F8ED76F6B797FA

NVM saved as : TITAN_S1_Q0MP1_K62V1_64_BSP_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_TC10_PR1_SP_V4_P36_84CDF4580BA4C35_0F8ED76F6B797FA.mt_sec
NVM saved to : C:\Users\marha\Desktop\A10s\

Done!
 

GuDron

Super Moderator
Staff member
Super Moderator
Jan 28, 2020
666
7
134
Language
English
SAMSUNG A10s A107F U8 Scatter File Android 11 | Scatter Firmware | CM2 File | SP Flash Tool Firmware | NVRAM File
A10s.png
Product Brand : samsung
Product Device : a10s
Product Model : SM-A107F
Product Name : a10sxx
Patch Level : RP1A.200720.012
Display ID : RP1A.200720.012.A107FXXU8CUH1
Build Time : 05.08.2021
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-07-01
Product Info : a10s
Product Board : S96116RA1
Board Platform : mt6765
Product Manfct : samsung

MT6765__samsung__SM-A107F__11__RP1A.200720.012.A107FXXU8CUH1__RP1A.200720.012__a10s

Read : preloader.bin
Read : efuse.img
Read : nvram.bin
Read : efs.img
ExtSparse : Compression ratio : 91%
Read : sec_efs.img
ExtSparse : Compression ratio : 11%
Read : param.img
Read : up_param.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : persistent.img
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : lk.bin
Read : steady.img
Read : boot.img
Read : recovery.img
Read : dtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 31%
Read : product.img
ExtSparse : Compression ratio : 73%
Read : system.img
ExtSparse : Compression ratio : 9%
Read : vbmeta.img
Read : cache.img
Read : omr.img
Read : userdata.img

FW Size : 3.80 GB
Android Info saved : _Android_info.txt
Scatter : MT6765_Android_scatter.txt
Saved to : A10s\MT6765__samsung__SM-A107F__11__RP1A.200720.012.A107FXXU8CUH1__RP1A.200720.012__a10s

Done!

Samsung A10s A107F NVRAM File Include In Zip File
NVRAM File:
TITAN_S1_Q0MP1_K62V1_64_BSP_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_TC10_PR1_SP_V4_P36_84CDF4580BA4C35_0F8ED76F6B797FA.mt_sec

Samsung A10s A107F U8 Scatter File Android 11 Download Here
MT6765__samsung__SM-A107F__11__RP1A.200720.012.A107FXXU8CUH1__RP1A.200720.012__a10s
Zip Password is: A10s_MobiFirms
 

GuDron

Super Moderator
Staff member
Super Moderator
Jan 28, 2020
666
7
134
Language
English

Samsung A107f dead boot repair CM2 All MTK Models Supported​


 

GuDron

Super Moderator
Staff member
Super Moderator
Jan 28, 2020
666
7
134
Language
English
MT6765__samsung__SM-A107F__11__RP1A.200720.012.A107FXXU8CUH1__RP1A.200720.012__a10s
Zip Password is: A10s_MobiFirms
 
Last edited:
  • Like
Reactions: aar79 and Wa stee