You can easily download the Symphony innova10 Flash File Firmware from the below link. This firmware With in a zip package. Just download and extract on your Computer to fix your smart phone fix any software issue
File Name: Symphony innova10
Android Version: 12
Processor: MTK
File Size: 1.5GB
Password Protected File
__ Admin : Gsm Arif Hasan Raj__
Contact US & Call : +8801857760950
Bkash : +8801857760950> Nogod:+8801857760950
Symphony innova 10_HW1_V11
Symphony innova 10_HW1_V12
Symphony innova 10_HW2_V13
Symphony innova 10 Fix Hang and Restart Problem Will Be Fix, After Flash Dead Hang Logo Blinking Display Will Be Fix if You Are used Wrong Version, After Flash Wrong Firmware Become Dead Show Only SPD Port, Keep Re Start & Show System Error Massage, Auto Recovery Mode & Auto Fast boot Mode Show Only, System Any Apps has been stopped Error Fix, unfortunately App has been stopped Apps error fix,
How to Flash Symphony innova10
It is possible to flash your Symphony Android phone using any of the above File But before flashing the Symphony Android Phone, you must back up your device so that if there's a problem like not matching the version firmware version after flashing, the file can be restored to its previous condition
- Download And Install USB Driver [If Already have Already Then Skip This Step]
- Extract the flash file With 7zip
- Open SP Flash Tool Run Tool
- load scatter files from the extracted firmware folder
- power off your smart phone and plug USB cable in brom mode [some phone has require hold vol+ vol- for boot in Computer
- if USB port is Detected to Your PC Flashing Will Start Automatically
- Wait for the process to finish, and please do not unplug your device before until the process complete
- If the flashing is successful, a green ring massage will show on the display.
- Unplug USB your phone from the computer and power on and done
