Z3X Vivo Y76 5G V2124 Flash With Pandora Dead Boot Recover Successfully

[GuDron]

Vivo Y76 5G PD2156F Firmware Flashing Dead Boot Recover Successfully​

Vivo Y76 5G V2124 Flash With Pandora Dead Boot Recover Successfully​

Selected model: Vivo PD2156F (Vivo Y76 5G)
Operation: Flash (Format all + download)
Software version: 5.0
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES

Parse scatter file... OK
Load Rom Images... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM19 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Currently using Beta/Unsafe operations
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID =  0x0217FE84, 0x3067155B, 0xAABF6CF5, 0x5B33E1EC
Load DownloadAgent... OK
Search DA... OK [11]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
UFS CID (FW VER): KM8V9001JM-B813 (0600)
Advanced Bypass Security... OK
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [14]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
   UFS_CID   : KM8V9001JM-B813
   UFS_FWVER : 0600
   BLOCK_SIZE: 0x0000001000 (4.00Kb)
   UFS_LU0   : 0x0000400000 (4.00Mb)
   UFS_LU1   : 0x0000400000 (4.00Mb)
   UFS_LU2   : 0x1DCB000000 (119.17Gb)
RAM INFO:
   INT_SRAM: 0x0000070000 (448.00Kb)
   EXT_RAM : 0x0100000000 (4.00Gb)
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand        : vivo
Product Manufacturer : vivo
Product Model        : V2124
Product Name         : 2124_EEA
Product Device       : 2124
Product Board        : k6833v1_64
Board Platform       : MTK6833
Build ID             : TP1A.220624.014
Build Date           : Fri Dec  9 10:30:07 CST 2022
Display ID           : Funtouch OS 13 Global
Security Patch       : 2022-12-01
Version SDK          : 33
Version Release      : 13
Version Codename     : REL
Firmware Version     : 38.12.2
Userdata FS Type     : F2FS
Creating autoformat settings... OK
Format "UFS_LU0" partition( 0x00000000..0x003FFFFF )... OK
Format "UFS_LU1" partition( 0x00000000..0x003FFFFF )... OK
Format "UFS_LU2" partition( 0x00000000..0x1DCAFFFFFF )... OK
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Generate mirror partition table... OK
Downloading mirror partition table... OK
Read major partition table... OK
Generate major partition table... OK
Downloading major partition table... OK
Download "preloader"... OK
Download "recovery"... OK
Download "vbmeta"... OK
Download "vbmeta_system"... OK
Download "vbmeta_vendor"... OK
Download "factory"... OK
Download "vbmeta_oem"... OK
Download "vbmeta_vgc"... OK
Download "storage"... OK
Download "metadata"... OK
Download "efuse"... OK
Download "md1img"... OK
Download "spmfw"... OK
Download "pi_img"... OK
Download "dpm_1"... OK
Download "dpm_2"... OK
Download "scp1"... OK
Download "scp2"... OK
Download "sspm_1"... OK
Download "sspm_2"... OK
Download "mcupm_1"... OK
Download "mcupm_2"... OK
Download "gz1"... OK
Download "gz2"... OK
Download "lk"... OK
Download "lk2"... OK
Download "boot"... OK
Download "logo"... OK
Download "dtbo"... OK
Download "tee1"... OK
Download "tee2"... OK
Download "super"... OK
Download "cache"... OK
Download "userdata"... OK
Flashing done!