Infinity Huawei Y6p Read Flash Done MED-LX9 10.1.0.219(C185E4R5P1) CM2

GuDron

Super Moderator
Staff member
Super Moderator
Jan 28, 2020
661
7
133
Language
English

Huawei Y6p Read Flash MED-LX9 10.1.0.219(C185E4R5P1) CM2​


Capture.PNG

Y6p Read Flash Log:​

Code:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : BCDB07B3F29EF01B41C9E29F1E047D2D
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 9C25BFB84D654A01024E6F89DEB601ED889C6DE9909D9D949D31732DDCD3C76C
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k62v1_64_mex_a32.bin
     EMI : CNT : 0020
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 90014A68433861503E01C371B8476781
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68433861503E
        EMMC: VEN : HYNIX : hC8aP>
        EMMC: SNN : 3279009863 ( 0xC371B847) , MF : 6/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6F56F521318801A2E3CA7AA370FC8604

DA : USB : HIGH-SPEED

Boot done!

Product Board  : k62v1_64_mex_a32
Board Platform : mt6765
Product Brand  : alps
Product Device : k62v1_64_mex_a32
Product Manfct : alps
Product Model  : k62v1_64_mex_a32
Product Name   : full_k62v1_64_mex_a32
Product Manfct : HUAWEI
Patch Level    : QP1A.190711.020
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-10-01
Build Time     : 11.05.2021
Product Info   : k62v1_64_mex_a32

MT6765__HUAWEI__k62v1_64_mex_a32__10__QP1A.190711.020__k62v1_64_mex_a32

Read : preloader.bin
Read : persist.img
ExtSparse : Compression ratio : 95%
Read : proinfo.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : oeminfo.img
Read : efuse.img
Read : cache.img
Read : recovery_vbmeta.img
Read : erecovery_vbmeta.img
Read : vbmeta.img
Read : lk.bin
Read : tz.img
Read : md1rom.img
Read : recovery.img
Read : recovery_ramdisk.img
Read : recovery_vendor.img
Read : erecovery.img
Read : erecovery_ramdisk.img
Read : erecovery_vendor.img
Read : dtbo.img
Read : boot.img
Read : ramdisk.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : vbmeta_odm.img
Read : vbmeta_cust.img
Read : vbmeta_hw_product.img
Read : eng_vendor.img
Read : eng_system.img
Read : patch.img
ExtSparse : Compression ratio : 99%
Read : preas.img
ExtSparse : Compression ratio : 93%
Read : preavs.img
ExtSparse : Compression ratio : 99%
Read : super.img
ExtSparse : Compression ratio : 17%
Read : version.img
ExtSparse : Compression ratio : 88%
Read : preload.img
ExtSparse : Compression ratio : 42%
Read : userdata.img

FW Size  : 3.11 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to :MT6765__HUAWEI__k62v1_64_mex_a32__10__QP1A.190711.020__k62v1_64_mex_a32\

Done!
 

muhammed65

New member
Jan 5, 2022
1
0
TURKİYE
Language
English

Huawei Y6p Read Flash MED-LX9 10.1.0.219(C185E4R5P1) CM2​


View attachment 161

Y6p Read Flash Log:​

Code:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : BCDB07B3F29EF01B41C9E29F1E047D2D
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 9C25BFB84D654A01024E6F89DEB601ED889C6DE9909D9D949D31732DDCD3C76C
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k62v1_64_mex_a32.bin
     EMI : CNT : 0020
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 90014A68433861503E01C371B8476781
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68433861503E
        EMMC: VEN : HYNIX : hC8aP>
        EMMC: SNN : 3279009863 ( 0xC371B847) , MF : 6/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6F56F521318801A2E3CA7AA370FC8604

DA : USB : HIGH-SPEED

Boot done!

Product Board  : k62v1_64_mex_a32
Board Platform : mt6765
Product Brand  : alps
Product Device : k62v1_64_mex_a32
Product Manfct : alps
Product Model  : k62v1_64_mex_a32
Product Name   : full_k62v1_64_mex_a32
Product Manfct : HUAWEI
Patch Level    : QP1A.190711.020
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-10-01
Build Time     : 11.05.2021
Product Info   : k62v1_64_mex_a32

MT6765__HUAWEI__k62v1_64_mex_a32__10__QP1A.190711.020__k62v1_64_mex_a32

Read : preloader.bin
Read : persist.img
ExtSparse : Sıkıştırma oranı : %95
Okuyun: proinfo.img
Okuyun: spmfw.img
Okuyun: tinysys-scp.bin
Okuyun: sspm.img
Okuyun: nvram.bin
Okuyun: oeminfo.img
Okuyun: efuse.img
Okuyun: cache.img
Okuyun: recovery_vbmeta.img
Okuyun: erecovery_vbmeta.img
Okuyun: vbmeta.img
Okuyun: lk.bin
Okuyun: tz.img
Okuyun: md1rom.img
Okuyun: recovery.img
Okuyun: recovery_ramdisk.img
Okuyun: recovery_vendor.img
Okuyun: erecovery.img
Okuyun: erecovery_ramdisk.img
Okuyun: erecovery_vendor.img
Okuyun: dtbo.img
Okuyun: boot.img
Okuyun: ramdisk.img
Okuyun: vbmeta_system.img
Okuyun: vbmeta_vendor.img
Okuyun: vbmeta_odm.img
Okuyun: vbmeta_cust.img
Okuyun: vbmeta_hw_product.img
Okuyun: eng_vendor.img
Okuyun: eng_system.img
Okuyun: patch.img
ExtSparse : Sıkıştırma oranı : %99
Okuyun: preas.img
ExtSparse : Sıkıştırma oranı : %93
Okuyun: preavs.img
ExtSparse : Sıkıştırma oranı : %99
Okuyun: super.img
ExtSparse : Sıkıştırma oranı : %17
Okuyun: version.img
ExtSparse : Sıkıştırma oranı : %88
Okuyun: preload.img
ExtSparse : Sıkıştırma oranı : %42
Okuyun: userdata.img

Yazılım Boyutu : 3.11 GB
Android Bilgisi kaydedildi: _Android_info.txt
Dağılım: MT6765_Android_scatter.txt
Kaydedilen :MT6765__HUAWEI__k62v1_64_mex_a32__10__QP1A.190711.020__k62v1_64_mex_a32\

Biti 
[/QUOTE]
Pasword?
 

maazali119db

New member
Jan 11, 2022
4
0
yazman
Language
English

Huawei Y6p Read Flash MED-LX9 10.1.0.219(C185E4R5P1) CM2​


View attachment 161

Y6p Read Flash Log:​

Code:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : BCDB07B3F29EF01B41C9E29F1E047D2D
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 9C25BFB84D654A01024E6F89DEB601ED889C6DE9909D9D949D31732DDCD3C76C
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k62v1_64_mex_a32.bin
     EMI : CNT : 0020
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 90014A68433861503E01C371B8476781
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68433861503E
        EMMC: VEN : HYNIX : hC8aP>
        EMMC: SNN : 3279009863 ( 0xC371B847) , MF : 6/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6F56F521318801A2E3CA7AA370FC8604

DA : USB : HIGH-SPEED

Boot done!

Product Board  : k62v1_64_mex_a32
Board Platform : mt6765
Product Brand  : alps
Product Device : k62v1_64_mex_a32
Product Manfct : alps
Product Model  : k62v1_64_mex_a32
Product Name   : full_k62v1_64_mex_a32
Product Manfct : HUAWEI
Patch Level    : QP1A.190711.020
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-10-01
Build Time     : 11.05.2021
Product Info   : k62v1_64_mex_a32

MT6765__HUAWEI__k62v1_64_mex_a32__10__QP1A.190711.020__k62v1_64_mex_a32

Read : preloader.bin
Read : persist.img
ExtSparse : Compression ratio : 95%
Read : proinfo.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : oeminfo.img
Read : efuse.img
Read : cache.img
Read : recovery_vbmeta.img
Read : erecovery_vbmeta.img
Read : vbmeta.img
Read : lk.bin
Read : tz.img
Read : md1rom.img
Read : recovery.img
Read : recovery_ramdisk.img
Read : recovery_vendor.img
Read : erecovery.img
Read : erecovery_ramdisk.img
Read : erecovery_vendor.img
Read : dtbo.img
Read : boot.img
Read : ramdisk.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : vbmeta_odm.img
Read : vbmeta_cust.img
Read : vbmeta_hw_product.img
Read : eng_vendor.img
Read : eng_system.img
Read : patch.img
ExtSparse : Compression ratio : 99%
Read : preas.img
ExtSparse : Compression ratio : 93%
Read : preavs.img
ExtSparse : Compression ratio : 99%
Read : super.img
ExtSparse : Compression ratio : 17%
Read : version.img
ExtSparse : Compression ratio : 88%
Read : preload.img
ExtSparse : Compression ratio : 42%
Read : userdata.img

FW Size  : 3.11 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to :MT6765__HUAWEI__k62v1_64_mex_a32__10__QP1A.190711.020__k62v1_64_mex_a32\

Done!
SIR PASSWORD PLZ....