- Jan 28, 2020
- 836
- 7
- 272
- Language
- English
Vivo Y55 5G V2127 Dead After Identify With Pandora
Flashing With Pandora After Writing Preloader With EasyJTAG Plus
Operation logs:
Selected model: Vivo V2127 (Vivo Y55 5G)
Operation: Flash (Download only)
Software version: 5.0
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES
Parse scatter file... OK
Load Rom Images... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM14 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Currently using Beta/Unsafe operations
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x93094813, 0xFC293749, 0x707B804C, 0x3887E4CA
Load DownloadAgent... OK
Search DA... OK [11]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
UFS CID (FW VER): H9HQ15AECMBDAR (A043)
Advanced Bypass Security... OK
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [14]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ15AECMBDAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... error(STATUS_PARTITION_TBL_NOT_EXIST)
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Generate mirror partition table... OK
Downloading mirror partition table... OK
Read major partition table... OK
Generate major partition table... OK
Downloading major partition table... OK
Download "preloader"... OK
Download "recovery"... OK
Download "vbmeta"... OK
Download "vbmeta_system"... OK
Download "vbmeta_vendor"... OK
Download "factory"... OK
Download "vbmeta_oem"... OK
Download "vbmeta_vgc"... OK
Download "storage"... OK
Download "metadata"... OK
Download "efuse"... OK
Download "md1img"... OK
Download "md1img_1"... OK
Download "spmfw"... OK
Download "pi_img"... OK
Download "dpm_1"... OK
Download "dpm_2"... OK
Download "scp1"... OK
Download "scp2"... OK
Download "sspm_1"... OK
Download "sspm_2"... OK
Download "mcupm_1"... OK
Download "mcupm_2"... OK
Download "gz1"... OK
Download "gz2"... OK
Download "lk"... OK
Download "lk2"... OK
Download "boot"... OK
Download "logo"... OK
Download "dtbo"... OK
Download "tee1"... OK
Download "tee2"... OK
Download "super"... OK
Download "cache"... OK
Download "userdata"... OK
Flashing done!
